working principle
2、 Product name, model and specification
1. Name
The name of this series of products is large angle belt conveyor
2. Model
The model of this series of products is DJ.JB 。
3. Specifications
This series of products can be combined into 101 specifications according to the basic bandwidth B (CM), the rib height h (mm) and the diameter D (CM) of the driving drum (see Table 2).
3、 Layout type
1. Basic layout
The basic fabric type and code of this series of products are shown in Table 3. These are five basic layout patterns. In fact, due to the adoption of transition devices such as conveyor belt, reversing wheel and reversing roller group, the edge guard can be bent many times in the same vertical plane to achieve a more complex layout.
Table 3 basic forms and codes of the edge blocking machine
2. Typical layout
In order to obtain better receiving and discharging conditions, especially when the conveying angle is greater than 45 °, the "s" type and "SC" type layout are recommended for this series of products, that is, the lower horizontal receiving section and the upper horizontal discharging section are set up for the edge blocking machine (see Fig. 1).